EDS O2D1 Systems

EDS-O2D1 Pulse Demand™ System

The EDS-02D1 System enables the general aviation pilot to fly at pressure altitudes up to 25,000 feet with safety and comfort. The EDS-O2D1 digital Pulse- Demand™ system reduces Oxygen consumption dramatically. Different from the "standard" constant flow systems, the EDS-O2D1 Pulse-Demand™ system wastes no Oxygen during the breathing cycle when oxygen is is not being delivered to the lungs. The average user will enjoy a duration increase of two to three times compared to the constant flow systems.

The built in Barometer adjusts for Altitude increase while reducing the pilots work load.

The unit operates for up to 100 hours on two AA batteries.

The EDS-O2D1 should be used with any of our XCR, XCP, or 4-place FPR regulator. for correct pressure and oxygen delivery. The low-pressure service line is a high quality polyurethane line that is kink-resistant and flexible under varying temperatures. The cannula, face mask and service line connect to the EDS unit via color-coded "Quick-Connects" providing an air-tight fitting by hand. These fittings can be connected and disconnected many times. With the optional XCP connecting kit, the EDS can be used with an XCP system at the same time flow meters are being used. In addition, the optional ALPS Facemask with or without microphone, is the perfect addition to any EDS system.

The O2D1 Basic Kit.

If you already have a Cylinder and MH Regulator, you can order just the O2D1 unit kit.

The O2D1 kit comes with (2) AA batteries and 2 cannulas (1 Standard and 1 Flare-Tip) and 1 face mask in a handy carry bag. Various configurations of our complete O2D1 systems are listed below.

Description: EDS-O2D1 Kit
MH Item #: 00EDS-1048-00

O2D1 Basic Kit with Regulator

Description: O2D1 kit with your choice of MH-Regulator. You supply the cylinder.

Note: 540 regulators are US standard. DIN-477 regulators fit European style cylinder valves.

Description: EDS-O2D1 with XCR-540 regulator. REG-1032XCR

MH Item #: 00EDS-1052-00

Description: EDS-O2D1 with XCP-540 regulator. REG-1004_XCP

MH Item #: 00EDS-1046-01

Description: EDS-O2D1 with XCR-540 regulator with gauge.

MH Item #: 00EDS-1054-01

Description: EDS-O2D1 with XCR DIN-477 (Euro Inlet) Regulator with gauge.

MH Item #: 00EDS-1062-02

DUAL O2D1 Kits with Split Kit.

Description: (2) EDS-O2D1 with XCR-540 Regulator w/gauge. 2 place w/ split kit.

Great set-up for tandem Sail-planes or any tandem Aircraft

MH Item #: 00EDS-1054-02

Description: (2) EDS-O2D1 with XCR DIN-477 (Euro Inlet) Regulator w/gauge. 2 place w/ split kit.
Great set-up for tandem Sail-planes or any tandem Aircraft

MH Item #: 00EDS-1061-00

DUAL O2D1 Kits for FPR Regulator.

Description: (2) EDS-O2D1 with FPR-540 regulator . 2 place.

Great set-up for tandem Sail-planes or any tandem Aircraft

MH Item #: 00EDS-1046-02

Description: (2) EDS-O2D1 with FPR-540 regulator w/gauge. 2 place.
Great set-up for tandem Sail-planes or any tandem Aircraft

MH Item #: 00EDS-1055-00

Description: (2) EDS-O2D1 with FPR-DIN regulator w/gauge. 2 place.
Great set-up for tandem Sail-planes or any tandem Aircraft

MH Item #: 00EDS-1060-00

EDS-O2D1 kits with STR inline regulators

BNC Oxygen connectors to work with almost any type of built-in aircraft oxygen systems.

BNC-SCOTT
BNC-SC01-100 connector fits most Beechcraft, Mooney and Piper with built-in oxygen systems.

BNC-PB-566
Fits most Cessna single engine prior to 1980.
Fits most Cessna twin engine prior to 1970.

BNC-PB-750
Fits most late model Cessna singles 1980 on.
Fits most late model Cessna twins 1970 on.
Also fits Piper Matrix.

Description: O2D1-X-STR (no connector)
Note: If using your own connector make sure there is no restrictor installed.

MH Item #: 00EDS-0050-00

Description: O2D1-X-STR-BNC (scott)
MH Item #: 00EDS-0050-01

Description: O2D1-X-STR-BNC (PB750)

MH Item #: 00EDS-0050-02

Description: O2D1-X-STR-BNC (PB566)

MH Item #: 00EDS-0050-03

Description: O2D1-X-STR-CPC (Cirrus-Cessna-Columbia)

MH Item #: 00EDS-0050-04

EDS-O2D1 Pulse Demand™ System with Aluminum Cylinder.

The basic EDS-O2D1 system consists of the following items: Aluminum Oxygen cylinder with Full-Pack or CMK mounting kit, the XCR primary reducing regulator, low-pressure service line, EDS Pulse Demand™ unit, breathing cannula, face mask and tote bag.

A favorite with Soaring Pilots

O2D1 Kits with Aluminum Cylinders
See Cylinder Chart PDF at bottom of this section for cylinder demensions.

Description: EDS-O2D1 with AL-113 Aluminum cylinder and XCR-540 regulator.

MH Item #: 00EDS-0052-01

W/Holster

Description: EDS-O2D1 with AL-180 Aluminum cylinder and XCR-540regulator.

MH Item #: 00EDS-0053-01

with Holster

Description: EDS-O2D1 with AL-180 Aluminum cylinder and XCR-540 regulator

MH Item #: 00EDS-0054-01
with Full Pack

Description: (2) EDS-O2D1 2-place system with AL-180 Aluminum cylinder and FPR-540 regulator.

Great set-up for tandem Sail-planes or any tandem Aircraft

MH Item #: 00EDS-0054-02
with Full Pack

Description: EDS-O2D1 with AL-180 Aluminum cylinder and XCR-DIN-477 regulator.

MH Item #: 00EDS-0054-D1
with Full Pack

Description: EDS-O2D1 with AL-248 Aluminum cylinder and XCR-540 regulator.

MH Item #: 00EDS-0058-01

with Full Pack

Description: (2) EDS-O2D1 2-place system with AL-248 Aluminum cylinder and FPR-540 regulator.

Great set-up for tandem Sail-planes or any tandem Aircraft

MH Item #: 00EDS-0058-02
with Full Pack

Description: EDS-O2D1 with AL-248 Aluminum cylinder and XCR-DIN regulator.

MH Item #:00EDS-0058-D1

with Full Pack

Description: EDS-O2D1 with AL-415 Aluminum cylinder and XCR-540 regulator.

MH Item #: 00EDS-0060-01
with Full Pack

Description: (2) EDS-O2D1 units with AL-415 Aluminum cylinder, FPR-540 regulator.

Great set-up for tandem Sail-planes or any tandem Aircraft
MH Item #: 00EDS-0060-02
with Full Pack

Description: EDS-O2D1 with AL-415 Aluminum cylinder and XCR-DIN-477 regulator.

MH Item #: 00EDS-0060-D1
with Full Pack

Description: EDS-O2D1 with AL-647 Aluminum cylinder and XCR-540 regulator

MH Item #: 00EDS-0062-01
with Full Pack

Description: EDS-O2D1 with AL-682 Aluminum cylinder and XCR-540 regulator.

MH Item #: 00EDS-0064-01
with Full Pack

O2D1 Kits with Composite Cylinders

Description: EDS-O2D1 with KF-011 Kevlar cylinder and XCR-540 regulator.

MH Item #: 00EDS-0002-01
with Full Pack

With DIN Valve

Description: EDS-O2D1 with CFFC-022 carbon fiber cylinder, XCR-540 regulator.

MH Item #: 00EDS-0004-01
with Full Pack

Description: EDS-O2D1 and CFF-480 Silica cylinder, XCR-540 regulator.

MH Item #: 00EDS-0084-01
with Full Pack

With DIN Valve

Description: EDS-O2D1 and CFF-048 Silica cylinder, XCR-540 regulator.

MH Item #: 00EDS-0014-01
with Full Pack

Attachments:
File	Description	File size
CAMI Testing of Pulse Oxygen Systems		1812 Kb
Cylinder Chart	12/01/2011	107 Kb
EDS-O2D1 Manual	4/5/2012	1479 Kb
EDS Data Sheet		6 Kb
O2D1-O2D2 Maintenance Program	11/15/2012	340 Kb
O2D1 Dimensions		31 Kb
Older Version EDSA1 Operation Manual		89 Kb
Older Version EDSD1 Operation Manual		215 Kb