Ground Support Equipment Transfillers

O2 Transfiller FBO Kit

GSE-1050d

You asked for it and we made it. Many of our Fixed Base Operators(FBO) have requested a complete oxygen filling system with regulator.
Well here it is. We have put together a complete system with everything you need.

O2 Transfiller TR-55

The TR-55 is the most economical way to fill your cylinder. One side has a CGA-540 nut & nipple with an O-ring seal, while the other end is equipped with a large hand nut with bare nipple. This allows you to slowly and safely bleed the line so the fittings can be easily removed from the cylinder. This transfiller is also available in a DIN-477 (Euro-norm) version. Standard length 18 inches (45.72 cm). Custom lengths available on request.

O2 Transfiller TR-75b

The TR-75b is our most popular personal transfiller. It is equipped with O-ring seals on both of the CGA-540 (oxygen) ends for a positive and air-tight fit by hand. A handy bleed valve is included to relieve the pressure in the system so that the fittings can be easily removed from the cylinder without damage to the O-ring seals. This transfiller is also available in the DIN-477 (euro-norm) version.
Standard length 24 inches (60.96 cm). Custom lengths available on request.

O2 Transfiller TR-95b

TR-95b The TR-95b is an economical transfilling system for soaring and flying clubs where many cylinders are serviced frequently. Both connecting ends have O-ring seals for a positive air-tight fit. The pressure/contents gauge shows how much oxygen remains in the master (rental) cylinder.
Standard length 48 inches (121.92 cm). Custom lengths available on request.

O2 Transfiller TR-105b

TR105b The TR-105 is a dual gauge version of our TR-95b. The TR-105 has an additional gauge at the slave cylinder side so that you can pre-check cylinders without a gauge that you are about to fill. Also, the gauge is great for monitoring the transfill process.
Standard length 48 inches (121.92 cm). Custom lengths available on request.

O2 Transfiller TR-875

The TR-875 is a CGA-870 (medical oxygen fitting) to CGA-540 (standard oxygen fitting) transfilling device. The TR875 allows you to transfill between equipment that has a CGA-870 (medical) fitting and a standard CGA-540 fitting. All connections are air-tight by hand without the use of tools. TR 875

O2 Transfiller TR-CIC-540

CIC-4
TR-CIC-540 Cylinder intercoupling kit allows the cascading of several master cylinders
for a customized transfilling station. This kit comes with a CGA-540 Tee kit and high pressure flex-line.
One each needed for each additional tank.